Product Manual (X-Carve Version)
Please read before installing and operating your Suckit Dust Boot. Includes importance warnings, maintenance procedures, drawings and parts list
Product Manual (SO3 Version)
Please read before installing and operating your Suckit Dust Boot. Includes importance warnings, maintenance procedures, drawings and parts list
Product Manual (SO3 HDZ Version)
Please read before installing and operating your Suckit Dust Boot. Includes importance warnings, maintenance procedures, drawings and parts list
Close Up Installation for Rail spacers (XCarve Version)
Close up image of proper installation of rail spacers
Product Manual (OX Version)
Please read before installing and operating your Suckit Dust Boot. Includes importance warnings, maintenance procedures, drawings and parts list
OX Front X Gantry Plate Drawing
If ordering and OX CNC Dust Boot please ensure your plate match this drawing.
Product Manual (Oops Clamps)
Please read before installing and operating your Oops Clamps. Includes importance warnings, maintenance procedures, drawings and parts list
Suckit Dust Boot - XCarve Version
To assemble the slide mounts and spacers to the shoe, use the longer slide mount screws provided and sandwich the spacer between the shoe and the magnetized slide mount.
Install Tip:
Please ensure you check that your homing switches or soft limits are set to work with your Suckit Dust Boot. Please check your clearance before performing a powered homing sequence and, if necessary, adjust accordingly.
Suckit Dust Boot - SO3 Version
Install Tip:
Before tightening the 4 mount screws, center the Shoe hole with the Router Collet. Once lined up, finish tightening the screws.
Depending on the production run of your machine, the standoffs may use either the 10-24 or M5 screws, so both sizes have been provided.
Please contact us if you are not using the Carbide 3D limit switches. We will provide extra mounting hardware.
Suckit Dust Boot - SO3 Upgraded HDZ Version
Please check out the website below for instruction on how to install the "Suckit Ears" to allow for mounting
https://www.beavercnc.co.uk/post/2018/07/15/fitting-the-stuckit-dustboot-supports-to-the-hdz
Installation Video (SO3 Version)
A step by step video showing how to install your Suckit Dust Boot onto your Shapeoko 3
Customer Installation Video (SO3 Version)
Installation and review videos from customers.
Video created by Chad (Mancrafting)
Installation Video - Directed Suction for XCarve New & Improved
A step by step video showing how to properly install your Suckit Dust Boot onto your X-Carve with upgraded Z axis
Oops Clamps Installation /
How to use Video
A step by step video showing how to properly use your Oops Clamps
Mill it yourself (MIYS)
A step by step video showing how to make and use your MIYS Suckit Dust Boot
Assembling your Suckit Shoe
How to properly assemble your Suckit Dust Boot Shoe. Includes how to attach the magnetic slide mounts and router hole plate along with proper brush installation.
Adjusting to fit your Spindle
A step by step video showing how to properly adjust your Suckit Dust Boot to your spindle.
Installation Video - Shapeoko 2
A step by step video showing how to properly install your Suckit Dust Boot onto Shapeoko 2
Installation Video (Customer Video)- Shapeoko 2
A step by step video showing how to properly install your Suckit Dust Boot onto Shapeoko 2
Suckit Pro Brush tip
If you have purchased a Suckit Dust Boot Pro model, you will receive both a 1" brush and a 1.5" brush. The 1.5" brush is cut slightly longer on purpose. The reason for this is for you to use the extra piece in your magnetic rear clip. The rear clip brush is press fit, so it can be changed between brush lengths.