Important Note: While Oops clamps are designed to use different hardware to install to individual wasteboards, please ensure to only use M6 screws for the Jackscrew. The Oops clamps have been pre-tapped and the use of other threads may affect the performance or durability of the product. Please see safety manual for proper use and installation.
Oops Clamps are ultra low profile, high strength clamps with a replaceable "oops" tip. The Oops Clamp design offers the clamping force of metal clamps with the safety of plastic clamps. All hardware is standard oﬀ the shelf M6 or 1/4-20. Diﬀerent lengths can be easily acquired at your local hardware store. You may also remove slide connector to use larger hardware.
Have you ever miss judge your cutting path? No problem with the Oops Clamps. If you cut into the tip it won't mess up your carve or damage your cutter like a metal or even a thick hardwood clamp can do. Best of all, the tip is easily replaced if you do cut into it! Additionally, Oops clamps are ultra low profile so you can cut deeper without worrying about your Spindle, Collet or Dust Boot hitting the clamp. Check out the Oops Clamps Video... https://youtu.be/lEfkyyRgwAE
This 8 set comes complete with 8 Oops Clamps (4 standard length and 4 long length) and 4 replacement "oops" tips. Be advised: No hardware is supplied with this set. You will need some M6 x 1 button head screws in varius lengths for the rear jack and possibly other hardward that matches your waste board threaded inserts.
Using T-Track? Check out our conversion kit... https://www.suckitdustboot.com/product-page/oops-clamp-hand-nut-for-1-4-20-t-track-4-pack
Long version has an overall length of 84mm with an adjustment range of 51mm's
Short version has an overall length of 65mm with an adjustment range of 32mm's
Please see specification sheet on the Assembly Tips and Tricks page for more info.